PerkinElmer® Triton® X-100 Wetting Agent

The aspiration of a dilute solution of Triton X-100 will improve the wetting characteristics of the burner chamber and the drain system for flame instruments. It is recommended that this dilute Triton X-100 solution should be aspirated during the initial warmup of the burner head and at the end of the analysis, before the flame is shut down. Polyethylene Glycol p-tert-Octylphenyl Ether C22H38O5, C14H21(OCH2CH2)4OH

Triton® X-100 is a nonionic detergent, 100% active ingredient, which is often used in biochemical applications to solubilize proteins. Triton X-100 has no antimicrobial properties.
Triton® X-100 is a nonionic surfactant which has a hydrophilic polyethylene oxide group (on average it has 9.5 ethylene oxide units) and a hydrocarbon lipophilic or hydrophobic group. The hydrocarbon group is a 4-(1,1,3,3-tetramethylbutyl)-phenyl group. It is related to the Pluronic range of detergents marketed by BASF. The pluronics are triblock copolymers of ethylene oxide and propylene oxide. The part formed from ethylene oxide is more hydrophilic than the part from propylene oxide. It is very viscous at room temperature and is thus easiest to use after being gently warmed.

Triton® X Series surfactants are versatile nonionic surfactants recognized for their wetting, detergency, superior hard surface, metal cleaning and excellent emulsification performance. TRITON X Series surfactants are used in almost every type of liquid, paste, and powdered cleaning compound, ranging from heavy-duty industrial products to gentle detergents. They are important ingredients of primary emulsifier mixtures used in the manufacture of emulsion polymers and stabilizers in latex polymers. TRITON X Series surfactants are recognized for pigment wetting and stabilization in coatings, and are offered in a range of HLB to match specific wetting and dispersing requirements.

Image(s) are representative of the product group and not
Read More
The aspiration of a dilute solution of Triton X-100 will improve the wetting characteristics of the burner chamber and the drain system for flame instruments. It is recommended that this dilute Triton X-100 solution should be aspirated during the initial warmup of the burner head and at the end of the analysis, before the flame is shut down. Polyethylene Glycol p-tert-Octylphenyl Ether C22H38O5, C14H21(OCH2CH2)4OH

Triton® X-100 is a nonionic detergent, 100% active ingredient, which is often used in biochemical applications to solubilize proteins. Triton X-100 has no antimicrobial properties.
Triton® X-100 is a nonionic surfactant which has a hydrophilic polyethylene oxide group (on average it has 9.5 ethylene oxide units) and a hydrocarbon lipophilic or hydrophobic group. The hydrocarbon group is a 4-(1,1,3,3-tetramethylbutyl)-phenyl group. It is related to the Pluronic range of detergents marketed by BASF. The pluronics are triblock copolymers of ethylene oxide and propylene oxide. The part formed from ethylene oxide is more hydrophilic than the part from propylene oxide. It is very viscous at room temperature and is thus easiest to use after being gently warmed.

Triton® X Series surfactants are versatile nonionic surfactants recognized for their wetting, detergency, superior hard surface, metal cleaning and excellent emulsification performance. TRITON X Series surfactants are used in almost every type of liquid, paste, and powdered cleaning compound, ranging from heavy-duty industrial products to gentle detergents. They are important ingredients of primary emulsifier mixtures used in the manufacture of emulsion polymers and stabilizers in latex polymers. TRITON X Series surfactants are recognized for pigment wetting and stabilization in coatings, and are offered in a range of HLB to match specific wetting and dispersing requirements.

Image(s) are representative of the product group and not

Certificates of Analysis

This service is currently unavailable!

2023