PerkinElmer® Stainless Steel Sample Loops for Model 7725 Rheodyne Injectors
The size designations of stainless steel loops are nominal. The actual volumes can differ from the theoretical designations because of the +/- 0.025 mm (0.001 in.) tolerance of the metal tubing bore.
Accuracy of large metal loops (1.0 mm, 0.040 in. bore) is about +/-5%, intermediate loops (0.5 mm, 0.020 in. bore) +/-10%, and small loops (0.2 mm, 0.007 in. bore) +/-30%.
Model 7725 Injector loops are not interchangeable with loops for the Model 7125. The port angle for the 7725 is 30° whereas the port angle for the 7125 is 20°, requiring the loops to have a different shape.
Image(s) are representative of the product group and not necessarily the individual product.
Read More
Accuracy of large metal loops (1.0 mm, 0.040 in. bore) is about +/-5%, intermediate loops (0.5 mm, 0.020 in. bore) +/-10%, and small loops (0.2 mm, 0.007 in. bore) +/-30%.
Model 7725 Injector loops are not interchangeable with loops for the Model 7125. The port angle for the 7725 is 30° whereas the port angle for the 7125 is 20°, requiring the loops to have a different shape.
Image(s) are representative of the product group and not necessarily the individual product.
The size designations of stainless steel loops are nominal. The actual volumes can differ from the theoretical designations because of the +/- 0.025 mm (0.001 in.) tolerance of the metal tubing bore.
Accuracy of large metal loops (1.0 mm, 0.040 in. bore) is about +/-5%, intermediate loops (0.5 mm, 0.020 in. bore) +/-10%, and small loops (0.2 mm, 0.007 in. bore) +/-30%.
Model 7725 Injector loops are not interchangeable with loops for the Model 7125. The port angle for the 7725 is 30° whereas the port angle for the 7125 is 20°, requiring the loops to have a different shape.
Image(s) are representative of the product group and not necessarily the individual product.
Accuracy of large metal loops (1.0 mm, 0.040 in. bore) is about +/-5%, intermediate loops (0.5 mm, 0.020 in. bore) +/-10%, and small loops (0.2 mm, 0.007 in. bore) +/-30%.
Model 7725 Injector loops are not interchangeable with loops for the Model 7125. The port angle for the 7725 is 30° whereas the port angle for the 7125 is 20°, requiring the loops to have a different shape.
Image(s) are representative of the product group and not necessarily the individual product.
Certificates of Analysis
This service is currently unavailable!