DWK Life Sciences 90 mm ULTRA-WARE® Microfiltration Assembly with Stainless Steel Support

The 90 mm vacuum microfiltration assemblies are designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter. This assembly with stainless steel support is used for filtering viscous or proteinaceous solutions or to produce ultra-clean filtrate.

• Filtration rates are up to four times faster than 47 mm filters
• The funnel is graduated from 300 to 1000 mL in 50 mL increments
• Prefilter size is 70 mm diameter, and the approximate filter area is 38.5 cm2
• Connection to a 1 liter filtration flask (available as an accessory) is made with a #8 silicone stopper
• Maximum funnel capacity is 1100 mL
• This unit is supplied with a 304 stainless steel support screen, a glass support base, a 300 mL graduated funnel, an anodized aluminum clamp and a # 8 silicone stopper
• 80 x 80 304 stainless steel mesh, 0.0055" opening size, 19.4% open area, 0.007" wire diameter
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Image(s) are representative of the product group and not necessarily the individual product.
Read More
The 90 mm vacuum microfiltration assemblies are designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter. This assembly with stainless steel support is used for filtering viscous or proteinaceous solutions or to produce ultra-clean filtrate.

• Filtration rates are up to four times faster than 47 mm filters
• The funnel is graduated from 300 to 1000 mL in 50 mL increments
• Prefilter size is 70 mm diameter, and the approximate filter area is 38.5 cm2
• Connection to a 1 liter filtration flask (available as an accessory) is made with a #8 silicone stopper
• Maximum funnel capacity is 1100 mL
• This unit is supplied with a 304 stainless steel support screen, a glass support base, a 300 mL graduated funnel, an anodized aluminum clamp and a # 8 silicone stopper
• 80 x 80 304 stainless steel mesh, 0.0055" opening size, 19.4% open area, 0.007" wire diameter
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Image(s) are representative of the product group and not necessarily the individual product.

Certificates of Analysis

This service is currently unavailable!

DWK Life Sciences 90 mm ULTRA-WARE® Microfiltration Assembly with Stainless Steel Support Accessories

2023