DWK Life Sciences 90 mm ULTRA-WARE® Microfiltration Assembly with Fritted Glass Support
The 90 mm vacuum microfiltration assemblies are designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter. The assembly with fritted glass support is used for general filtration.
• Filtration rates are up to four times faster than 47 mm filters
• The funnel is graduated from 300 to 1000 mL in 50 mL increments
• Maximum funnel capacity is 1100 mL
• Prefilter size is 70 mm diameter; approximate filter area is 38.5 cm2
• Connection to a 1 liter filtration flask (available as an accessory) is made with a #8 silicone stopper
• Unit is supplied with a 40-60 micron porosity fritted glass support base, a 1 liter graduated funnel, an anodized aluminum clamp and a #8 silicone stopper
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Image(s) are representative of the product group and not necessarily the individual product.
Read More
• Filtration rates are up to four times faster than 47 mm filters
• The funnel is graduated from 300 to 1000 mL in 50 mL increments
• Maximum funnel capacity is 1100 mL
• Prefilter size is 70 mm diameter; approximate filter area is 38.5 cm2
• Connection to a 1 liter filtration flask (available as an accessory) is made with a #8 silicone stopper
• Unit is supplied with a 40-60 micron porosity fritted glass support base, a 1 liter graduated funnel, an anodized aluminum clamp and a #8 silicone stopper
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Image(s) are representative of the product group and not necessarily the individual product.
The 90 mm vacuum microfiltration assemblies are designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter. The assembly with fritted glass support is used for general filtration.
• Filtration rates are up to four times faster than 47 mm filters
• The funnel is graduated from 300 to 1000 mL in 50 mL increments
• Maximum funnel capacity is 1100 mL
• Prefilter size is 70 mm diameter; approximate filter area is 38.5 cm2
• Connection to a 1 liter filtration flask (available as an accessory) is made with a #8 silicone stopper
• Unit is supplied with a 40-60 micron porosity fritted glass support base, a 1 liter graduated funnel, an anodized aluminum clamp and a #8 silicone stopper
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Image(s) are representative of the product group and not necessarily the individual product.
• Filtration rates are up to four times faster than 47 mm filters
• The funnel is graduated from 300 to 1000 mL in 50 mL increments
• Maximum funnel capacity is 1100 mL
• Prefilter size is 70 mm diameter; approximate filter area is 38.5 cm2
• Connection to a 1 liter filtration flask (available as an accessory) is made with a #8 silicone stopper
• Unit is supplied with a 40-60 micron porosity fritted glass support base, a 1 liter graduated funnel, an anodized aluminum clamp and a #8 silicone stopper
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Image(s) are representative of the product group and not necessarily the individual product.
Certificates of Analysis
This service is currently unavailable!