Our Bench Top Solid Waste Container with lid is a convenient way to discard of contaminated solid wastes right where you work. Not carrying your contaminated items across a lab to a larger waste container means preventing cross contamination. The latching lid reduces solvent emissions from the waste inside, keeping the air you breathe safer and healthier.

Consider the Health and Safety of your Laboratory!
It is against the law to add chemically contaminated solid waste to the general trash in the laboratory.

Our Benchtop Solid Waste Container with detachable base and lid with gasket is an ideal containment system for contaminated solid wastes, preventing possible cross contamination of products.

The latching lid significantly reduces the emission of solvent-soaked solid waste back into the workspace. ideal if you routinely handle radioisotopes, beta-emitters, wet silica gel, contaminated gloves, kimwipes, filter papers, wiping rags, pipets, pipet bulbs, and other disposables.

It has a small footprint and can easily sit in the corner of a fume hood or bench, and is made of chemically resistant HDPE with a detachable base.

Specifications
• Height (Lid Closed): 11 in.
• Height (Lid Open): 21 in.
• Footprint (with base): 13 x 13 in.
• Footprint (without base): 7 x 7 in.
• Capacity (approx.): 1.5G / 5L
• Each Solid Waste Container comes with a single sample liner bag. Additional can liners are sold separately in packs of 100 or 250, red or yellow or biohazard bags.

Poly Liner Bags
• Length: 18 in. (45.72 cm)
• Width: 14 in. 35.56 cm)
• Thickness: 0.05 mm (50 Microns)
• Weight: 5.4 lbs/ 100 and 8.5 lbs/ 250

Image(s) are representative of the product group and not necessarily the individual product.