Precision Laboratories Peracetic Acid Test Strips, 500ppm
This test strip is calibrated at 0, 100, 250, and 500ppm, and gives results in just seconds. Peracetic acid is another sanitizing agent primarily used in some segments of the food industry, such as organic produce and poultry. The recommended strength of peracetic acid is typically 150-200ppm, however, this can vary by location. Check with your local health inspector to determine what ppm level you should be reaching.
Peracetic Acid Test Strip, 500ppm Instructions:
• Remove one test strip from the vial, being careful not to touch the test pad with your fingers.
• Dip the test strip into the solution to be tested for 2 seconds.
• Remove and shake off any excess liquid.
• Compare the test pad to the color chart after 10 seconds.
NOTE: If the strips are turning yellow in color, it is possible that the concentration of Peracetic Acid is too high.
Image(s) are representative of the product group and not necessarily the individual product.
Read More
Peracetic Acid Test Strip, 500ppm Instructions:
• Remove one test strip from the vial, being careful not to touch the test pad with your fingers.
• Dip the test strip into the solution to be tested for 2 seconds.
• Remove and shake off any excess liquid.
• Compare the test pad to the color chart after 10 seconds.
NOTE: If the strips are turning yellow in color, it is possible that the concentration of Peracetic Acid is too high.
Image(s) are representative of the product group and not necessarily the individual product.
This test strip is calibrated at 0, 100, 250, and 500ppm, and gives results in just seconds. Peracetic acid is another sanitizing agent primarily used in some segments of the food industry, such as organic produce and poultry. The recommended strength of peracetic acid is typically 150-200ppm, however, this can vary by location. Check with your local health inspector to determine what ppm level you should be reaching.
Peracetic Acid Test Strip, 500ppm Instructions:
• Remove one test strip from the vial, being careful not to touch the test pad with your fingers.
• Dip the test strip into the solution to be tested for 2 seconds.
• Remove and shake off any excess liquid.
• Compare the test pad to the color chart after 10 seconds.
NOTE: If the strips are turning yellow in color, it is possible that the concentration of Peracetic Acid is too high.
Image(s) are representative of the product group and not necessarily the individual product.
Peracetic Acid Test Strip, 500ppm Instructions:
• Remove one test strip from the vial, being careful not to touch the test pad with your fingers.
• Dip the test strip into the solution to be tested for 2 seconds.
• Remove and shake off any excess liquid.
• Compare the test pad to the color chart after 10 seconds.
NOTE: If the strips are turning yellow in color, it is possible that the concentration of Peracetic Acid is too high.
Image(s) are representative of the product group and not necessarily the individual product.
Certificates of Analysis
This service is currently unavailable!