Labnet FastPette® V2 Pipette Controller
The FastPette™ V2 was designed with the user in mind. It has a lightweight handle with smooth push-button and ergonomically located switches. An updated valve control system allows very fine control. Battery powered, this pipette controller works with glass and plastic pipettes in the 1 to 100 mL range.
• High aspiration speed - 25 mL in 4 seconds
• Cordless work for up to 8 continuous hours
• Ergonomically designed
The aspiration speed can be set to high or low to adjust for the volume of the pipette and viscosity of the liquid. The suction can also be adjusted by the amount of pressure applied to the trigger button. Dispensing can be carried out by gravity or supported by the pump, which empties the pipette with a blow out step. The FastPette™ V2 is protected from the entrance of liquids by both a PTFE filter and a safety valve. The silicone holder decreases the force required for secure pipet mounting. To protect samples from cross contamination, the filter, nosepiece, and pipette holder are easily exchanged and autoclaved.
When fully charged, the FastPette™ V2 can be used continuously for over 2,000 pipetting cycles. A low battery warning light indicates that the unit should be recharged. Should the charge run out while working with the pipette, simply attach the power supply and continue to use. The battery is protected against over charging by timing and thermal systems. The FastPette™ V2 is supplied with the power supply/charger and PTFE filter.
Specifications:
• Weight: 0.5 lb (0.21 kg)
• Battery life: 2,000 pipetting cycles
• Battery charging time: 11 to 14 hours
• Pipette types: Glass or plastic, 1 to 100 mL
• Electrical: 120V, 60 Hz
†U.S. and Canada Sales Only
Image(s) are representative of the product group and not necessarily the individual product.
Read More
• High aspiration speed - 25 mL in 4 seconds
• Cordless work for up to 8 continuous hours
• Ergonomically designed
The aspiration speed can be set to high or low to adjust for the volume of the pipette and viscosity of the liquid. The suction can also be adjusted by the amount of pressure applied to the trigger button. Dispensing can be carried out by gravity or supported by the pump, which empties the pipette with a blow out step. The FastPette™ V2 is protected from the entrance of liquids by both a PTFE filter and a safety valve. The silicone holder decreases the force required for secure pipet mounting. To protect samples from cross contamination, the filter, nosepiece, and pipette holder are easily exchanged and autoclaved.
When fully charged, the FastPette™ V2 can be used continuously for over 2,000 pipetting cycles. A low battery warning light indicates that the unit should be recharged. Should the charge run out while working with the pipette, simply attach the power supply and continue to use. The battery is protected against over charging by timing and thermal systems. The FastPette™ V2 is supplied with the power supply/charger and PTFE filter.
Specifications:
• Weight: 0.5 lb (0.21 kg)
• Battery life: 2,000 pipetting cycles
• Battery charging time: 11 to 14 hours
• Pipette types: Glass or plastic, 1 to 100 mL
• Electrical: 120V, 60 Hz
†U.S. and Canada Sales Only
Image(s) are representative of the product group and not necessarily the individual product.
The FastPette™ V2 was designed with the user in mind. It has a lightweight handle with smooth push-button and ergonomically located switches. An updated valve control system allows very fine control. Battery powered, this pipette controller works with glass and plastic pipettes in the 1 to 100 mL range.
• High aspiration speed - 25 mL in 4 seconds
• Cordless work for up to 8 continuous hours
• Ergonomically designed
The aspiration speed can be set to high or low to adjust for the volume of the pipette and viscosity of the liquid. The suction can also be adjusted by the amount of pressure applied to the trigger button. Dispensing can be carried out by gravity or supported by the pump, which empties the pipette with a blow out step. The FastPette™ V2 is protected from the entrance of liquids by both a PTFE filter and a safety valve. The silicone holder decreases the force required for secure pipet mounting. To protect samples from cross contamination, the filter, nosepiece, and pipette holder are easily exchanged and autoclaved.
When fully charged, the FastPette™ V2 can be used continuously for over 2,000 pipetting cycles. A low battery warning light indicates that the unit should be recharged. Should the charge run out while working with the pipette, simply attach the power supply and continue to use. The battery is protected against over charging by timing and thermal systems. The FastPette™ V2 is supplied with the power supply/charger and PTFE filter.
Specifications:
• Weight: 0.5 lb (0.21 kg)
• Battery life: 2,000 pipetting cycles
• Battery charging time: 11 to 14 hours
• Pipette types: Glass or plastic, 1 to 100 mL
• Electrical: 120V, 60 Hz
†U.S. and Canada Sales Only
Image(s) are representative of the product group and not necessarily the individual product.
• High aspiration speed - 25 mL in 4 seconds
• Cordless work for up to 8 continuous hours
• Ergonomically designed
The aspiration speed can be set to high or low to adjust for the volume of the pipette and viscosity of the liquid. The suction can also be adjusted by the amount of pressure applied to the trigger button. Dispensing can be carried out by gravity or supported by the pump, which empties the pipette with a blow out step. The FastPette™ V2 is protected from the entrance of liquids by both a PTFE filter and a safety valve. The silicone holder decreases the force required for secure pipet mounting. To protect samples from cross contamination, the filter, nosepiece, and pipette holder are easily exchanged and autoclaved.
When fully charged, the FastPette™ V2 can be used continuously for over 2,000 pipetting cycles. A low battery warning light indicates that the unit should be recharged. Should the charge run out while working with the pipette, simply attach the power supply and continue to use. The battery is protected against over charging by timing and thermal systems. The FastPette™ V2 is supplied with the power supply/charger and PTFE filter.
Specifications:
• Weight: 0.5 lb (0.21 kg)
• Battery life: 2,000 pipetting cycles
• Battery charging time: 11 to 14 hours
• Pipette types: Glass or plastic, 1 to 100 mL
• Electrical: 120V, 60 Hz
†U.S. and Canada Sales Only
Image(s) are representative of the product group and not necessarily the individual product.
Certificates of Analysis
This service is currently unavailable!
