Labconco® SteamScrubber® Laboratory Glassware Washers

Labconco® SteamScrubber® Laboratory Glassware Washers

Materials/Construction:
• Upper and lower standard open racks of 304 stainless steel
• 304 stainless steel top, door, tank, upper and lower wash arms. Freestanding models also have stainless steel exterior sides and top
• One-piece, tool-free, stainless steel, fine mesh particle drain filter
• Four leveling feet offering increased height adjustability
• Aluminum-backed insulation and fiberglass thermal blanket
• Factory-installed drain hose and band clamp
• Two year warranty on parts and labor
• Made in the USA
• IQ/OQ available

Performance:
• Water temperature up to 93°C (199°F)
• Steam generator that produces hot vapor to help remove stubborn labware contaminants
• Pump rated at 96 gal/min (363 L/min) when operated at 115V, 60 Hz and 208/230V, 50 Hz and 112 gal/min (424 L/min) on 208/230V, 60 Hz
• Synchronous drain pump rated at up to 4.2 gal/min (16 L/min)
• Purified water pump to bring non-pressurized purified water into the tank for up to eight pure water rinses
• Forced air drying into the tank programmable up to 240 minutes and from 25-80°C (77-176°F)
• Electronic door latch with SpeedVent Technology to facilitate faster drying
• Detergent dispenser for powder or liquid detergent
• Level-sensing 6 ml rinse aid solution dispenser
• Operation at or below 62 decibels

Controls/User Interface:
• Full color touch screen display with CleanWorks OS providing full user control
• 9 factory-set programs: RINSE ONLY, PLASTIC, GLASS, GLASS PLUS, LIFE SCIENTIFIC, ANALYTICAL, DRY ONLY, ECO WASH, CLEAN WASHER. Up to 200 user-defined programs
• Clear and specific alarm displays
• Calibratable setpoints such as: temperature, fill vo
Read More
Labconco® SteamScrubber® Laboratory Glassware Washers

Materials/Construction:
• Upper and lower standard open racks of 304 stainless steel
• 304 stainless steel top, door, tank, upper and lower wash arms. Freestanding models also have stainless steel exterior sides and top
• One-piece, tool-free, stainless steel, fine mesh particle drain filter
• Four leveling feet offering increased height adjustability
• Aluminum-backed insulation and fiberglass thermal blanket
• Factory-installed drain hose and band clamp
• Two year warranty on parts and labor
• Made in the USA
• IQ/OQ available

Performance:
• Water temperature up to 93°C (199°F)
• Steam generator that produces hot vapor to help remove stubborn labware contaminants
• Pump rated at 96 gal/min (363 L/min) when operated at 115V, 60 Hz and 208/230V, 50 Hz and 112 gal/min (424 L/min) on 208/230V, 60 Hz
• Synchronous drain pump rated at up to 4.2 gal/min (16 L/min)
• Purified water pump to bring non-pressurized purified water into the tank for up to eight pure water rinses
• Forced air drying into the tank programmable up to 240 minutes and from 25-80°C (77-176°F)
• Electronic door latch with SpeedVent Technology to facilitate faster drying
• Detergent dispenser for powder or liquid detergent
• Level-sensing 6 ml rinse aid solution dispenser
• Operation at or below 62 decibels

Controls/User Interface:
• Full color touch screen display with CleanWorks OS providing full user control
• 9 factory-set programs: RINSE ONLY, PLASTIC, GLASS, GLASS PLUS, LIFE SCIENTIFIC, ANALYTICAL, DRY ONLY, ECO WASH, CLEAN WASHER. Up to 200 user-defined programs
• Clear and specific alarm displays
• Calibratable setpoints such as: temperature, fill vo

Certificates of Analysis

This service is currently unavailable!

Labconco® SteamScrubber® Laboratory Glassware Washers Accessories

2023