We manufacture and distribute fine chemicals and laboratory
products - with quality and delivery you can count on every time.

Corner
Target2<sup>®</sup> Regenerated Cellulose Syringe Filters

Target2® Regenerated Cellulose Syringe Filters

Regenerated cellulose syringe filters are ideally suited for almost any laboratory procedure, from HPLC sample preparation to dissolution sample testing. Regenerated cellulose possesses superior chemical resistance in either aqueous or organic-based sample environments. Its extremely low biological-based binding coefficient is ideally suited for maximum sample recoveries of biological-based assays. Regenerated cellulose contains no binders, surfactants or wetting agents to assure minimal extractables in analytical procedures.

• Hydrophilic membrane provides excellent flow rates and extremely low binding coefficients
• Superior choice for biological assays, gel capsule dissolution testing, protein sample matrixes
• Compatible with a wide range of aqueous and organic-based sample environments
• Recommended for reverse phase and normal phase HPLC

Target2 Syringe Filters are an ideal choice for general purpose laboratory use. Robust and reliable, they deliver excellent performance at an attractive price. They provide cleaner sample extracts by removing interfering materials and fine particles.

• Low extractable membranes and housing
• HPLC performance tested
• Plain polypropylene housing
• 30 mm products pressure rated to 100 psi
• Enhanced luer lock inlet which provides secure attachment to syringes
• Low hold-up volume allows for the treatment of small sample volumes with minimal sample loss

Specifications
• Membrane: HPLC certified regenerated cellulose
• Protein binding: <5 g/cm2
• Porosities: 0.20 m and 0.45 m
• Autoclave: Sterilize by dry heat at 121°C for 15 minutes
• Pre-filter (if fitted) GMF 1 m

Applications:
• HPLC and organic solvent sample preparation and clean up
• Dissolution sample analysis, especially high-binding tablets or capsules
• Protein-based samples with high non-specific binding
• Sample analysis which require maximum recoveries
• Analysis requiring low non-specific binding over a wide pH range

Chemical Incompatibilities:
• Sulfuric acid, hydrochloric acid, phosphoric acid or nitric acid >25%, DMF, phenol

Image(s) are representative of the product group and not necessarily the individual product.
Catalog Item Availability Mfr. Part # List Price Unit
475-73468-PK 4 mm Target2 0.2 um Regenerated Cellulose Syringe Filters - 100 ea

Specifications

F2504-8 $149.50 PK
475-73465-PK 4 mm Target2 0.45 um Regenerated Cellulose Syringe Filters - 100 ea

Specifications

F2504-7 $148.30 PK
475-73507-PK 17 mm Target2 0.2 um Regenerated Cellulose Syringe Filters - 100 ea

Specifications

F2513-8 $195.80 PK
475-73504-PK 17 mm Target2 0.45 um Regenerated Cellulose Syringe Filters - 100 ea

Specifications

F2513-7 $187.75 PK
475-73438-PK 30 mm Target2 0.2 um Regenerated Cellulose Syringe Filters - 100 ea

Specifications

F2500-8 $333.95 PK
475-73432-PK 30 mm Target2 0.45 um Regenerated Cellulose Syringe Filters - 100 ea

Specifications

F2500-7 $271.50 PK

Description Back to Top

Regenerated cellulose syringe filters are ideally suited for almost any laboratory procedure, from HPLC sample preparation to dissolution sample testing. Regenerated cellulose possesses superior chemical resistance in either aqueous or organic-based sample environments. Its extremely low biological-based binding coefficient is ideally suited for maximum sample recoveries of biological-based assays. Regenerated cellulose contains no binders, surfactants or wetting agents to assure minimal extractables in analytical procedures.

• Hydrophilic membrane provides excellent flow rates and extremely low binding coefficients
• Superior choice for biological assays, gel capsule dissolution testing, protein sample matrixes
• Compatible with a wide range of aqueous and organic-based sample environments
• Recommended for reverse phase and normal phase HPLC

Target2 Syringe Filters are an ideal choice for general purpose laboratory use. Robust and reliable, they deliver excellent performance at an attractive price. They provide cleaner sample extracts by removing interfering materials and fine particles.

• Low extractable membranes and housing
• HPLC performance tested
• Plain polypropylene housing
• 30 mm products pressure rated to 100 psi
• Enhanced luer lock inlet which provides secure attachment to syringes
• Low hold-up volume allows for the treatment of small sample volumes with minimal sample loss

Specifications
• Membrane: HPLC certified regenerated cellulose
• Protein binding: <5 g/cm2
• Porosities: 0.20 m and 0.45 m
• Autoclave: Sterilize by dry heat at 121°C for 15 minutes
• Pre-filter (if fitted) GMF 1 m

Applications:
• HPLC and organic solvent sample preparation and clean up
• Dissolution sample analysis, especially high-binding tablets or capsules
• Protein-based samples with high non-specific binding
• Sample analysis which require maximum recoveries
• Analysis requiring low non-specific binding over a wide pH range

Chemical Incompatibilities:
• Sulfuric acid, hydrochloric acid, phosphoric acid or nitric acid >25%, DMF, phenol

Image(s) are representative of the product group and not necessarily the individual product.

Shipping Back to Top

Shipping Costs
Click here for Shipping Costs
326186 has a rating of 4.9 stars based on 10 reviews.