We manufacture and distribute fine chemicals and laboratory
products - with quality and delivery you can count on every time.

Corner
Sample Mixing Accessories

Sample Mixing Accessories

Trust your samples to reliable rotators, shakers & rockers with Spectrum's selection of sample mixing accessories. Choose from IKA shaker accessories which are opto-electronically controlled small shakers with a very wide speed range and suitable for continuous operation; the Dual Port Mixing Tube ideal for use in the rotating mode for mixing dry ingredients; or the Laboratory Mixing Rotator used on the bench for general mixing applications and Western blotting.

Spectrum specializes in providing the top sample mixing accessories but if you do not see the product you require, just contact our chemical specialist at 800-772-8786. Over 45,000 Chemicals, batch traceability - Trust Your Ingredients!

Top Sellers in Sample Mixing Accessories

All :  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
    Showing 26-50 of 306 Previous | Page 1 2 3 4 of 13 | Next | Go
  • IKA® Fixing Clamp Attachment for KS 130 Shakers

    For processing round flasks, measuring flasks, and Erlenmeyer flasks. Please order fixing clips separately.

    • Capacity: 20 x AS 2.1 (25 mL), 12 x AS 2.2 (50 mL), 12 x AS 2.3 ...
  • IKA® Fixing Clip Attachment for KS 4000 Incubator Shakers

    • For shaking of flasks, Erlenmeyer flasks and bottles with a round crosssection (without fixing clips)
    • Dimensions (W x D x H): 470 x 440 x 25 mm
    • Number of ...
  • IKA® Fixing Clip Attachment for KS/HS 260 and KS 3000 Shakers

    For shaking flasks, Erlenmeyer flasks and bottles with a round crosssection (without fixing clips).

    Dimensions (W x D x H): 330 x 330 x 24 mm
    Weight: 1290 g

    Image(s) ...
  • IKA® Fixing Clip Support for KS/HS 501 Digital Shakers

    • For shaking flasks, Erlenmeyer flasks and pear-shaped flasks (without fixing clips)
    • Dimensions (W x D x H): 475 x 460 x 95 mm
    • Capacity: 110 x AS 2.1 (25 mL) ...
  • IKA® Flask Fixing Clips

    Fixing Clips for For processing round flasks, measuring flasks, and Erlenmeyer flasks. Fixing clips attach to Fixing Clip Attachment, Set-up Plates (sold separately, Cat. No. 330-33754, ...
  • IKA® KS 4000 Incubated Shakers

    New innovative incubator shaker design allows unattended operation in a temperature-controlled environment. Areas of application are: Mircro-organism growth, cell culture, serum medicine ...
  • IKA® MS 1.31 Test Tube Insert for MS 3 Shakers

    MS 1.31 Test tube insert for inserting into universal attachment (sold separately, Cat. No. 360-78214), for 14 test tubes 10 mm. Material: ethylvinyl-acetate.

    Image(s) are representative ...
  • IKA® MS 1.32 Test Tube Insert for MS 3 Shakers

    MS 1.32 Test tube insert for inserting into the universal attachment (sold separately, Cat. No. 360-78214), for 6 test tubes 12 mm. Material: ethylvinyl-acetate.

    Image(s) are representative ...
  • IKA® MS 1.33 Test Tube Insert for MS 3 Shakers

    MS 1.33 Test tube insert for inserting into the universal attachment (sold separately, Cat. No. 360-78214), for 4 test tubes 16 mm. Material: ethylvinyl-acetate.

    Image(s) are representative ...
  • IKA® MS 1.34 Test Tube Insert for MS 3 Shakers

    MS 1.34 Test tube insert for inserting into the universal attachment (sold separately, Cat. No. 360-78214), for any number of bore holes. Material: ethylvinyl-acetate.

    Image(s) are ...
  • IKA® MS 3.1 Standard Attachment

    MS 3.1 Standard attachment for test tubes and small vessels up to 50 mm. For use with MS 3 basic (Cat. No. 360-78008), MS 3 digital (Cat. No. 360-78005), MS 3 control (Cat. No. 340-98806), ...
  • IKA® MS 3.3 Universal Attachment

    MS 3.3 Universal attachment for various foam inserts (sold separately). For use with MS 3 basic (Cat. No. 360-78008), MS 3 digital (Cat. No. 360-78005), MS 3 control (Cat. No. 340-98806), ...
  • IKA® One-Hand Attachment for VXR Basic Shaker

    • For shaking single, non-fixed vessels of 1 to 250 mL
    • Dimensions (W x D x H): 130 x 135 x 40 mm
    • Weight: 160 g

    Image(s) are representative of the product ...
  • IKA® RD 1 Universal Mat

    • Universal mat for IKA® 2D Shakers (Cat. No. 360-78079 and 360-78082) and 3D Shakers (Cat. No. 360-78085 and 360-78088)
    • Set-up plate dimensions: 223 x ...
  • IKA® RD 2 Burled Mat

    • Burled mat for IKA® 2D Shakers (Cat. No. 360-78079 and 360-78082) and 3D Shakers (Cat. No. 360-78085 and 360-78088)
    • Set-up plate dimensions 223 x 223 ...
  • IKA® Second Level Attachment

    • Second level attachment for IKA® 2D Shakers (Cat. No. 360-78079 and 360-78082) and 3D Shakers (Cat. No. 360-78085 and 360-78088)
    • Width: 280 mm
    • ...
  • IKA® Stickmax® Universal Adhesive Mat

    Stickmax universal adhesive mat for the fixing clip attachments of shakers.
    • Ideal for frequently changing vessel types and sizes
    • Self-adhesive
    • Vessels ...
  • IKA® TB 1 Tray

    • Tray for IKA® 2D Shakers (Cat. No. 360-78079 and 360-78082) and 3D Shakers (Cat. No. 360-78085 and 360-78088)
    • Capacity: 28x5 mL tubes, 12 mm
    • ...
  • IKA® TB 2 Tray

    • Tray for IKA® 2D Shakers (Cat. No. 360-78079 and 360-78082) and 3D Shakers (Cat. No. 360-78085 and 360-78088)
    • Capacity: 16x15 mL tubes, 16 mm
    • ...
  • IKA® TB 3 Tray

    • Tray for IKA® 2D Shakers (Cat. No. 360-78079 and 360-78082) and 3D Shakers (Cat. No. 360-78085 and 360-78088)
    • Capacity: 14x30 mL tubes, 25 mm
    • ...
  • IKA® TB 4 Tray

    • Tray for IKA® 2D Shakers (Cat. No. 360-78079 and 360-78082) and 3D Shakers (Cat. No. 360-78085 and 360-78088)
    • Capacity: 10x30 mL tubes, 28 mm
    • ...
  • IKA® Test Tube Attachment for KS 130 Shakers

    For intensive shaking, e.g. small tubes, test tubes, cuvettes, centrifuge tubes.

    Dimensions (W x D x H): 220 x 230 x 95 mm
    Capacity: 64
    Vessel diameter: 10 - 16 mm
    Min. ...
  • IKA® Test Tube Attachment for VXR Basic Shaker

    • For up to 36 test tubes or centrifugal tubes with a diameter of 16 mm
    • Dimensions (W x D x H): 140 x 145 x 115 mm
    • Material: macrolon
    • Weight: 300 ...
  • IKA® Test Tube Inserts for VXR Basic Shaker

    Attachment for Eppendorf tubes or test tubes. For use with VXR basic Vibrax® (Cat. No. 330-23386).

    Image(s) are representative of the product group and not necessarily ...
  • IKA® Universal Attachment for KS 4000 Incubator Shakers

    • For various types of vessels. Infinitely variable clamping rolls allow universal adaptation to the vessels
    • Dimensions (W x D x H): 480 x 500 x 120 mm
    • Set-up ...
  • Showing 26-50 of 306 Previous | Page 1 2 3 4 of 13 | Next | Go